Skip to content
V Series Auto Booster Pumps c/w JAPAN Switch
Product Features :
- Pre-pressure one-piece forming diaphragm pressure tank with good appearance and corrosive resistant.
- Install overload protector in motor’s circuit to protect motors from burn out
- Special copper water pump flow channel design with high pumping efficiency.
- May select stainless steel water pump to avoid jamming shaft during long term idle.
Applications :
- For households, washing machines, and toilets pressure boosting use.
- Water supply for apartments and residences.
- Garden sprinkler systems.
- Barber shops and restaurants pressure boosting use.
Operating Conditions :
- Ambient temperature: +0℃~+40℃.
- Liquid temperature: +0℃~+40℃.
- Suction Head : Max. 6M
- Before using the pump, be sure the inlet pressure setting is lower than on setting of pressure switch.
Remarks:
- V400AS – Aluminium motor shell and stainless steel pump
- V400A – Aluminium motor shell steel pump
- V400AP – Aluminium motor shell steel pump with Anti-Rust Treatment
- V400S – Cast iron motor shell stainless steel pump
- V400AH/460AH – Equip with TAIWAN Switch, c/w Bronze Impeller
- All models equip with SANWA DENKI Switch, made in Japan except last alphabet affix H
- All models c/w Bronze Impeller
Model | Power (HP) | Voltage (V) | Factory Pressure Setting | Max. Head (M) | Max. Flow (L/min) | Inlet & Outlet |
| | | On (kg/cm2) | Off (kg/cm2) | | | |
V200 | 1/4 | 240 | 1.0 | 2.0 | 27 | 32 | 3/4" x 3/4" |
V200A | 1/4 | 240 | 1.0 | 2.0 | 27 | 32 | 3/4" x 3/4" |
V400APJ | 1/2 | 240 | 1.8 | 2.8 | 35 | 40 | 1" x 1" |
V400A | 1/2 | 240 | 1.8 | 2.8 | 35 | 40 | 1" x 1" |
V400AHJ | 1/2 | 240 | 1.8 | 2.8 | 35 | 40 | 1" x 1" |
V400S | 1/2 | 240 | 1.8 | 2.8 | 35 | 40 | 1" x 1" |
V400AS | 1/2 | 240 | 1.8 | 2.8 | 35 | 40 | 1" x 1" |
V200AHJ | 1/4 | 240 | 1.0 | 2.0 | 27 | 32 | 3/4" x 3/4" |
V460AHJ | 1/2 | 240 | 1.8 | 2.8 | 35 | 40 | 1" x 1" |
V800 | 1 | 240 | 2.0 | 3.2 | 38 | 56 | 1" x 1" |